Rotate seat cushion down into the seating position making sure that the seat cushion is locked into place and that the seat belt. The engine traction control and brake traction control system may be deactivated in certain situations. Press the button on either side of each map lamp to illuminate the lamps. If this should occur, you will neither lose the ability to steer the vehicle manually nor will it cause permanent damage. However, if the normal brakes fail, the parking brake can be used to stop your vehicle in an emergency.
Repair the damaged road wheel and re-mount it on the vehicle to restore system functionality. To remove, open the console lid and pull the bin straight up and out from the console housing. If the service engine soon light remains on, have your vehicle serviced at the first available opportunity. If the engine is overfilled, some oil must be removed from the engine by an authorized dealer. To remove the adjustable head restraint, do the following: 1. In case of acid contact with skin or eyes, flush immediately with water for a minimum of 15 minutes and get prompt medical attention.
This could damage the fuel system and its seal and cause injury to you or others. Also on the reverse side of the cover is a list of the fuses and to what it relates. If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. A mechanic can probably reset it using the port that actually draws the code which caused the failure. If checking and replacing the fuse for the component in question doesn't work, we recommend seeking assistance from a trusted professional mechanic. Anti-theft indicator The anti-theft indicator is located in the instrument panel cluster. For vehicles equipped with an automatic transmission, set the parking brake and shift to P Park.
If the volume is set above a certain level and the ignition is turned off, the volume will come back on at a nominal listening level when the ignition is turned back on. Release the clamps that secure the air filter housing cover. This feature provides engine braking and helps eliminate excessive shifting for optimum fuel economy and transmission cooling. Just did this today on a 02 Tribute. Door ajar: Illuminates when the ignition is in the on position and any door is open. If a specific category is selected, Jazz, Rock, News, etc. Steps for determining the correct load limit: 1.
This is the quickest and best way to address the issue. Children and booster seats vary in size and shape. If there is visible corrosion in wheel pilot hole, remove loose particles by wiping with clean rag and apply grease. The hazard flashers will operate when the ignition is in any position or if the key is not in the ignition. The use of wheels or tires not recommended by Mazda Motor Corporation may affect the operation of your tire pressure monitoring system. This information allows your Personal Safety System to tailor the airbag deployment and seat belt pretensioner activation depending upon seat belt usage. Use of any tire or wheel not recommended by Mazda can affect the safety and performance of your vehicle, which could result in an increased risk of loss of vehicle control, vehicle rollover, personal injury and death.
If the engine fails to start, turn the key to off and wait 30 seconds before trying again. Do not tow with a slingbelt. Do not connect the audio input jack to a line level output. Note: Do not wipe off any grease on the battery terminals on the back surface of the circuit board. Remove the air filter element from the air filter housing. Mazda does not recommend disabling this feature except in situations where speed reduction may be detrimental e.
Protecting the environment We must all play our part in protecting the environment. Pull bulb straight out of socket and push in the new bulb. Department of Transportation requires Mazda Motor Corporation to give you the following information about tire grades exactly as the government has written it. Mazda strongly recommends that drivers use extreme caution when using any device or feature that may take their focus off the road. Filling the tank The advertised fuel capacity of the fuel tank on your vehicle is equal to the rated refill capacity of the fuel tank as listed in the Maintenance.
Replacing high-mount brake lamp bulbs To remove the lamp assembly: 1. As the belt retracts, you will hear a clicking sound. Defrost: Distributes outside air through the windshield defroster vents and demister vents. They may cause squeaking, chatter noise, streaking and smearing. Additional Car2U system information can be found on-line at www. The left bank front of engine compartment can be relaced by removing the plastic cover then removing the connectors and bolts from the 3 ignition coils.
See Attaching child safety seats with tether straps and Recommendations for attaching safety restraints for children in this chapter for more information. Insert the discs, one at a time, label side up, when prompted. This operation is considered normal and will not affect function or durability of the transmission. See your authorized Mazda dealer or trailer rental agency for proper instructions and equipment for hooking-up trailer lamps. Insert the lug wrench through the access hole in the rear bumper.